Crayon Sky Music

Help with a TJ Wrangler sign of trouble in turn Jeep?

When I turn my lights on, the turn signal indicator right on the board remains lit although I did not click the sign turn right and after a few minutes begins to sound like me! moreover, the signal flashes turn right very fast, while the left turn signal blinking normally. the right turn signal works fender flares, Rear work signal, but the striker does not. I replaced the bulb and the bulb front fender flares, but the striker still working. I also replaced the fuse signal back behind the glove box. Help!

If you have access to a test light to take and examine the socket to see if it has any power to take of the return signal after removal of the bulb if there is no power that can have focus on the problem with the way the labels on the mineral-bulb set it.Look on the sides of the label at the side of the light and look down into the socket to see the side slots in the tabs are a closet into.The is the bottom of the bulb which is in the bulb goes into the deepest if not identical tumblers into the socket then only they would still grooves and the tongues of the bulb into.But go get some fine sand paper and clean the sides and bottom of the socket and the bulb, and a real clean, but also use some electrical spray to remove dirt or acid accumulate in the socket.And below the contact in the socket is a spring that makes contact to do in making push up for current or electricity in contact with the bottom of the bulb contacts.If you find that you still have no power to control socket for a wire side because that is not based on some metal that makes a complete circuit to operate the focus to turn the signal to work.If you have any questions about this just email me at hgm20002000@yahoo.com

Flat Fender Flares for 2007-2011 Jeep Wrangler from Omix-Ada/Rugged Ridge ID9227