roll fenders
1965 Mustang Fastback outbreak fender / help reverse stock?
I'm considering buying a 1965 Mustang fastback is an old car towed and as such has had the rear fenders flared or rolled. I was wondering if this is easily corrected, or that a workshop has to cut and then repaired with new sheet metal fi can someone can explain how, thanks
if only the edge of the arc that is rolled, then you can repair without having to replace everything. everything need is a hammer and a car together, and a gas torch. One that will cause the metal to near red. The trick is to beat down his lips as close to original as possible. the result will be corrugated metal, as it has been stretched to the torch. now has to be reduced. to heat the wavy bits, one point at a time. get red vivo, and then start to beat it flat with a hammer and dolly. the metal will be soft and begin to fall into place. as soon as it cools, it reduce further. before you know it, if you keep at it, you can get some consecutive flashes without having to replace large panels. is clearly a need painting in which hit and hammer it. well worth the effort if you're handy with tools.
Rolling Your Fenders w/Eastwood Fender Roller
Leave a Reply
