Crayon Sky Music

How do I get a Led Zeppelin tone with a Fender Stratocaster?

My SSS Stratocaster has the S-1 switch and I use a Marshall Haze 40watt. I use Ernie Ball Super Slinky’s and Fender Original Bullets.

Actually, Jimmy did use a Strat quite often when recording. In fact, the lead at the end of “stairway” was done with a strat. Although Jimmy is best known for his use of the Les Paul, he did use many different guitars over the years including strats and teles and his classic Danelectro. He was famous for blending these guitars to create monster guitar tones and most of what you hear from Page’s studio work is several layered together tracks built up to create a guitar “orchestra”. With this in mind, it is very difficult to obtain that full sound he has on the albums. He also used effects quite effectively (no pun intended)
To facilitate with trying to duplicate his sound I would start by increasing your gain to about 7. Reduce your treble to about 5.5. Kick your bass up to about 8.5 (set mid to what ever your ear likes) Back off the presence a bit and add some reverb. Use your bridge pickup for lead and heavy rhythm, and neck pickup for slower leads and some chordal work.
I would recommend putting a mini humbucker in the bridge position like the Seymour Duncan mini JB. This will help you get the thicker tone of the Paul but keep the same size as the single coil. Since Jimmy did a lot of layering in the studio, a good chorus pedal can help you attain that tone live. Jimmy also relied heavily on his echoplex unit and was one of the originators of using multiple echo settings and backwards echo effects. To that end, a good delay pedal would serve you well. Jimmy was also fond of the wah wah pedal. All of these effects can be had in one multi effect unit and the cost is very reasonable. This single pedal unit would be a good investment. (I know you don’t want to but any new gear, but when you do you should consider this)

Customer’s Cranked 1970 Super Reverb After Modification