Crayon Sky Music

Is this a good setup for my amp in my Hyundai Elantra 04?

I asked this before, but was not sure about the answer. It is specifications for each of the 2 A: 1200W max power 200W x 2 RMS into 4 ohms 500W RMS x 1 at 4 ohms speakers to be used is two 400 watt max 200 W RMS speakers for a 300-watt amplifier and two speakers and a maximum of 12 sub Dub with the following specifications: Size 12 "Weight 80 oz magnet Power Handling 400 RMS Frequency Response 20Hz – 500Hz with a 4 gauge battery powere me through the front of the car away from engine heat, through passenger protection under the tire either through an eyelet in the cabin. 100Amp fuse I installed 12 inches from the battery. This goes back, where I added a fuse extra security for joining two 2-way 4 gauge cables. For a cable, which pass through a capacitor to a 40 amp fuse to an amplifier, where the two peaks 400 speakers are connected. I ran out of room to read the following question and answer that one … please

The wiring is functional. Make sure upgrade all the wiring to the battery and chassis, and alternator. Your car probably has a small amp output (taking into account the mark), so it can need to upgrade the alternator. When the power supply becomes an issue, provided the following update: 1. Alternator 2. Battery 3. Capacitor capacitor can subplantar as # 1 if you want to do it the cheap way and correct. The cover can help to "hide" their shortcommings systems. Read some of your other questions and wanted to respond to one thing. You said you wanted to use a switch to turn off the amplifier when not needed. Really would not in the main power for the amplifier, consider placing the activation switch away from the main unit. Will remove the need for high-power switch, the trigger distance is minimal (12 volts, 0.2 amps?). I also re-set the 2 300 watts of amplifier speakers that sub. # 1, would reduce the load to the amplifier to an unacceptable level. # 2 do not have the function of active low pass crossover for the subwoofer. # 3 The speakers do not make a "stereo" sound, it would be in black and white. Y # 4, The total power of the amplifier may be better put to use in the subcontinent, would sound more complete system "Par." Connects two sets of speakers to 2 channel amplifier, which Sony can handle a 2 ohm load and you will still have stereo separation.

Fender Amp Demo Video – Champion 600