Gibson SG Guitars
How can you define the Gibson SG Guitars? Mostly by the devil points located on the top of the guitar’s body. Because of their slender design and not so heavy materials, these guitars grew popular when first announced in 1960. They were marketed and sold as a sturdy, dense-bodied guitar and given preference over the heavier, regular guitar models.
Creator and inventor Gibson Les Paul was the person to bring the SG model to the music world. Although he was not fond of the design himself and thus persistently requested that his name be taken off the model! Aside from this, the SG model grew to be highly favorable and was also commercialized as possessing the “fastest neck in the world” due to the sleek neck that was crafted on it.
Once the first SG model was put out on the market, three other guitars of Gibson came into production. The high custom model did not bear the SG name, but it did have Les Paul’s autograph near the edge of the fingerboard just around the neck. The other two models now produced as well were the Standard Gibson model and the JR Gibson model.
Mahogany, Birch Laminate and Maple make up the hardwood qualities of this highly desired guitar. Often composed of Mahogany or Birch is what makes up the neck of this particular model.
Woods of Rosewood or Ebony compose the fret board for this guitar. While it is widely available in the many wood colors that create it, it is also available in black or white. This guitar is even painted in specialty colors and designs for most famous musicians. Many famous music artists have chosen Gibson guitars as their ideal choice for performances.
Artists are known to have the Gibson SG guitars often modified and made specially for them. Many of them have become long time followers of Gibson model guitars. These guitar models, consisting of the finest woods and well crafted designs, have risen to popularity among guitar musicians all around.
pickguard for fender
What things do I need to paint a Fender Stratocaster GOLD?
The guitar has no paint on it, I still need to sand? What spray paint mark must be used to paint and what brand I can use to clear coat? What type should I use tape to cover the parts that do not want paint? Do I have to paint the rapper in a special way, or paint the same way I painted the rest?
Hello! It is necessary to prepare the wood with a sealant appropriate, apply a primer coat, followed up with multiple layers of color and color-sanded, finished with a clear coat, and perform a final sanding and polished surface. You do not need to do any additional sanding before starting the process, if you are satisfied with the surfaces. After applying the first coat, it is possible find spots that need filling and sanding before the additional layers of color. The striker needed no primer or clear coat, but use some sandpaper 1000 grain to dull the surface before painting. Be sure to use a quality brand of spray paint you can buy off the shelf "(Krylon, Rustoleum, etc) a hardware store or even get mixed colors (Dupont, Sikkens, etc) and put into spray cans at your local auto store parts. If you use hairspray, it will help easy to work with the glaze, however, is harder to find more colors in aerosol cans. Make sure you get all the paint, which are capable sand color of the target. Mask the areas you want left exposed using the half-tac (usually blue, like the 3M brand) painter's tape. For really get a professional looking finish, you need a good tutorial on how the Stewart-MacDonald Spray Refinishing http://www.stewmac.com/shop/Video DVD, _DVD / finishing, _repair / Spray_Finishing.html or paint your own guitar http://www.paintyourownguitar.com/ book. Hope this helps some. Best Regards, Dana
Install copper shield on pickguard